Tractel Dynafor Pro 50T dynamometer
NOVOTEST T-U2 is the best price hardness tester in the world that works on UCI (Ultrasonic Contact Impedance) technology.
Unlike the Leeb hardness tester, such as the Leeb Hardness Tester NOVOTEST T-D2 and the Leeb Hardness Tester NOVOTEST T-D3, UCI hardness tester can also be used with small or thin-walled products, as well as parts of complex shape or with areas that need to be tested in hard-to-reach places. The device with wide functionality and high reliability is UCI Hardness Tester NOVOTEST T-U2. This is a device that has been manufactured by our company for more than 10 years, and has established itself as the most optimal option in the world market for the combination of price – quality.
MEASURING HARDNESS OF COMPLEX SHAPED PRODUCTS
The UCI Hardness Tester NOVOTEST T-U2 main purposes are products of complex shape (gear teeth, bearings etc.) and hard-to-reach places that need to be tested (grooves, radius surfaces, welds and heat affected zones etc.)
Maximum capacity WLL |
50t |
---|---|
Safety coefficient |
Minimum 4 |
Precision |
0,2% at 21°C full scale |
Resolution |
20kg |
Sample rate |
4 Hz, up to 32 Hz in “Peak Hold Mode” |
Maximum display |
110% of WLL |
Net weight |
11.45 |
Tractel Dynafor Pro 50T dynamometer
NOVOTEST T-U2 is the best price hardness tester in the world that works on UCI (Ultrasonic Contact Impedance) technology.
Unlike the Leeb hardness tester, such as the Leeb Hardness Tester NOVOTEST T-D2 and the Leeb Hardness Tester NOVOTEST T-D3, UCI hardness tester can also be used with small or thin-walled products, as well as parts of complex shape or with areas that need to be tested in hard-to-reach places. The device with wide functionality and high reliability is UCI Hardness Tester NOVOTEST T-U2. This is a device that has been manufactured by our company for more than 10 years, and has established itself as the most optimal option in the world market for the combination of price – quality.
MEASURING HARDNESS OF COMPLEX SHAPED PRODUCTS
The UCI Hardness Tester NOVOTEST T-U2 main purposes are products of complex shape (gear teeth, bearings etc.) and hard-to-reach places that need to be tested (grooves, radius surfaces, welds and heat affected zones etc.)
Maximum capacity WLL |
50t |
---|---|
Safety coefficient |
Minimum 4 |
Precision |
0,2% at 21°C full scale |
Resolution |
20kg |
Sample rate |
4 Hz, up to 32 Hz in “Peak Hold Mode” |
Maximum display |
110% of WLL |
Net weight |
11.45 |
YOU MAY ALSO LIKE